Publicidad
Idiomas disponibles
Idiomas disponibles
AC24NE
Wi-Fi Device
Functions of Buttons and Terminals
Back-up Batteries
Battery Power: The battery white connector must be tted the correct way round (positive red to +positive) or you will short
circuit the control board. There are 2 x 12v batteries tted under the control board. They are connected together in series to
make 24vDC via a black cable with a yellow fuse with positive of one battery to negative of second battery. The remaining
positive and negative terminals go to the control board as per the photo above.
Terminales
• LED description:
Blue: LED will be ashing during WiFi pairing, and be ON while it completed.
Green: LED will be ashing if WB black box receives signal from the APP.
If your home WiFi disconnects, the green light will ash continuously,
and it will be o until WiFi is connected again.
Red: System failure or wrong PIN.
LED Display
P button:
Wi-Fi Paring: Press 1 sec
Default Setting: Press 3 sec
Botón R:
Presione para reiniciar
OUTPUT: 24 Volt 2.2Ah
12 Volt 2.2Ah Battery
SERIES
Opening your life
12 Volt 2.2Ah Battery
1 11
Publicidad
