GE JEG3002 Manual De Uso Y Cuidado página 54

All manuals and user guides at all-guides.com
2.3 Installing the backguard (see features by model chart
at end of the manual).
Unpack the backguard located
1
at the top of the range.
Place the backguard on the
2
cooktop and make sure that the
holes of both pieces match, so
the backguard is correctly seated
(see picture 1).
Place the 2 round head screws at
3
the lower face of both, back-
guard and cooktop, firmly
tighten with the nuts (see
picture 1). Use pliers.
Place the metallic reinforcements
4
in position (see picture 2) and
slide them to their final location.
Place 1 Phillips head screw on
5
each support, at the top of the
backguard (see picture 2).
Place 2 round head screws on
6
each support, at the lower face
of backguard and cooktop (see
picture 2), firmly tighten with
the nuts. Use pliers.
2.4 Connecting the gas supply
Make sure your home has a gas pressure regulator that provides the correct
pressure.
DO NOT USE PLASTIC HOSES TO CONNECT THE GAS
SUPPLY AS THEY COULD LEAK, EVEN BRAIDED FLEXIBLE
STEEL HOSES.
54
Picture 1
Picture 1