Adler europe AD 8080 Manual De Uso página 8

SAFETY CONDITIONS. IMPORTANT SAFELY INSTRUCTIONS
PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions differ if the device is used for commercial purposes.
1. Before using the product, please read and always follow the instructions below. The manufacturer is not liable for any damage
resulting from improper use.
2. The product is intended for indoor use only. Do not use the product for any purpose incompatible with its intended use.
3. The applied voltage is 220-240V ~ 50Hz. For safety reasons, it is not appropriate to connect multiple devices to a single
electrical outlet.
4. Be careful when using near children. Do not let children play with the product. Do not let children or people unfamiliar with the
device use it unsupervised.
5. WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental
abilities or persons with no experience or knowledge of the device, only under the supervision of a person responsible for their
safety, or if they have been instructed on safe use. use of the device and are aware of the risks associated with its operation.
Children should not play with the device. Cleaning and user maintenance should not be performed by children, unless they are 8
years of age or older, and are performed under supervision.
6. Always gently pull the plug out of the outlet after using the product, holding it with your hand. Never pull on the power cord !!!
7. Never leave the product connected to a power source unattended. Even if operation is interrupted for a short time, disconnect it
from the mains, disconnect the power supply.
8. Never put the power cord, plug or the entire device into water. Never expose the product to weather conditions such as direct
sunlight, rain, etc. Never use the product in wet conditions.
9. Periodically check the condition of the power cord. If the power cord is damaged, take the product to a professional service
center for replacement to avoid hazardous situations.
10. Never use the product with a damaged power cord if it has been dropped or damaged in any way, or if it is not working
properly. Do not try to repair a damaged product yourself as this may result in electric shock. Always take the damaged device to a
professional service center for repair. All repairs may only be performed by authorized service technicians. Repair performed
incorrectly may result in dangerous situations for the user.
11. Never place the product on or near hot or warm surfaces or kitchen appliances, such as an electric oven or gas burner.
12. Never use the product near flammable materials.
13. The appliance is intended for domestic use only
14. Use only original assembly parts and power cords supplied by the manufacturer and delivered with the device.
15. Do not overfill the refrigerator. Transparent doors must close.
16. Products inside should never cover the ventilation grille.
17. Using the refrigerator only in an upright position.
18. Do not expose the refrigerator to direct sunlight, rain, snow, excessive moisture, etc.
19. Be especially careful when moving the device. Protect against falling while moving.
20. Keep free space around the ventilation holes. Covering them will reduce the cooling capacity and may damage the radiator.
21. Only ready (packed) items may be stored in the refrigerator.
22. It is not recommended to use the refrigerator if the ambient temperature is below 18 ° C and above 38 ° C.
23. This refrigeration appliance is not intended to be used as a built-in appliance
Device Description:
1. Control Panel 2. Casing
Control Panel:
1. Upper zone temperature UP 2. Upper zone temperature Down
4. Lower zone Temperature Up 5. Lower zone Temperature Down
7. Light On/Off 8. Power On/Off
Control Panel Operation:
1. Temperature UP(1), the upper zone's temperature increases 1℃ each time the button is pressed.
2. Temperature DOWN(2), the upper zone's temperature decreases 1℃ each time the button is pressed.
3. Upper Zone Temperature Display
4. Temperature UP (4), the lower zone's temperature increases 1℃ each time the button is pressed.
5. Temperature DOWN(5), the lower zone's temperature decreases 1℃ each time the button is pressed.
6. Lower Zone Temperature Display
7. Turns the interior light ON and OFF.
8. Turns the Power ON and OFF
9. Toggle the LED display between Celsius or Fahrenheit readings
-- Press Button 1 and Button 2 simultaneously for 3 seconds to switch the LED display between Celsius or Fahrenheit readings.
Temperature Setting:
Please note that the upper zone is designed for White wine. The lower zone is designed for Red wine. As such the temperature for the upper zone Cannot be set to temperatures higher than the
lower zone. For example: If you set the upper zone for 10℃ you cannot set the lower zone to 11℃.
Bottle Loading Method:
Wooden shelf capacity: 4 or 7 bottles / shelf
Bottom shelf capacity: 4 or 5 bottles / shelf
Maintain a minimum 20mm between bottle and back plate
Ensure storage Bottle bottom Diameter is 78mm & Height 300mm, otherwise it might mean fewer Bottle loading.
To ensure bottle and shelf safety, check the following tips:
Spread your bottles out as evenly as possible over the shelves, so the weight is not concentrated in one point, and make sure your bottles will not touch the back of the cabinet
Make sure bottles are not all grouped together at the top or bottom of the cabinet
Following loading instructions provided in section above, according to the type of storage fixtures with which your cabinet is equipped, and never stack bottles on a sliding shelf.
The Humidity will be fluctuated based on Room Humidity and Temperature, please add an special film between the bottles before storage inside cabinet, which will ensure the label of bottle will
not be damaged.
Humidity percentage inside cabinet: 50%-80%
3. Shelf 4. Hinge
3. Upper zone temperature Display
6. Lower zone Temperature Display
ENGLISH
5. Door gasket 6.Door frame
8