tti Tech PMR-122TX Manual De Instrucciones página 4

Charge Information (For PMR-122TX-2CH)
DESKTOP CHARGING STAND
NOTE: Only TTI approved rechargeable batteries can be
recharged in the radio transceiver.
PMR-122TX OPERATIONAL MODES
Control Buttons
Power on-off Button
Press and hold the POWER on/off button for at least 2 seconds.
You will hear a confirming melody to indicate the unit is on. To
turn the unit off, press and hold the button for at least 2 seconds.
Monitor/Display Backlight Button
This button is used to to check activity on the current frequency
before transmitting. Check activity by pressing the monitor (M)
Button longer than 1 second ; the icon ( ) will appear on the
display and you will hear static if frequencey is clear. Do not
transmit if you hear conversation. Hold down the Monitor Button
again longer than 1 second, and the icon ( ) will disappear
from the display. This feature is also useful when communicating
with other parties at extreme range. By pressing the monitor
button momentarily, the LCD backlight is turned on ; the LCD
backlight will be turned off automatically in about 5 seconds,
unless the monitor button is pressed momentarily once again.
CHARGING STAND
POWER JACK
ADAPTOR POWER PLUG
AC WALL ADAPTOR/
CHARGING
TRANSFORMER
* INPUT : 230VAC
* OUTPUT : 8VDC
PMR RADIO CHARGING
COMPARTMENTS(2)
CHARGING COMPARTMENT
LEDs(2): RED---CHARGING
4