Publicidad
Idiomas disponibles
Idiomas disponibles
Attention!
The non return valves must be checked once a
year.
Shut-off the fl oor pipe. Remove the complete isolation
valve with a large screw driver counter clockwise.
Check the non return valves.
In the event of frost hazard and draining the pies,
the installation unit must be removed.
If the hot water and cold water connection are ex-
chaned, turn the installation unit 180° around.
Technical data
Minimum fl ow pressure with
downstream resistance
Max. operating pressure
Recommended operating pressure
bar
Test pressure
Max. hot water temperature
Temperature scale adjustible
Safety check
Hot water connection
Cold water connection
Nominal capacity for ½" and ¾" by 3 bar
l/min
Minimum fl ow rate
The water temperature at the hot water inlet should
be at least 2° C higher then the desired hot water
temperature.
The Hansgrohe ½" thermostatic mixer (code number
15373180) and ¾" (code number 15374180), can
be used in conjunction with hydraulic or thermo-
statically controlled combination boilers providing
English
there is a minimum of 1,5 bar pressure and the
combinaton boiler prepare enough water for the
downstream consumption.
Spare parts
1
2
3
4
5
6
7
8
9
0,5 bar
XXX = Colors
10,0 bar
000 chrome
1,0 - 5,0
ted
090 chrome plated/gold
16,0 bar
450 white
80° C
880 satin chrome
20° - 80° C
38° C
LH
RH
5 0
5 l/min
Setting knop
Cover plate
Sleeve
Thermoelement
Non return valve
Isolation valve
Seals
Seals
Extension 40 mm
36391XXX
95028XXX
95032XXX
94282000
95033000
95036000
95037000
96364000
92615000
pla-
9
Publicidad
