Publicidad
Idiomas disponibles
Idiomas disponibles
EN
6 Ventilation grids
7 Plug
8 Plug technical data
A. Skin tone range
For the appliance features, refer to the external packaging.
Use only the supplied accessories.
trEatmENt arEas
The appliance can be used to remove unwanted body hair in the following areas:
underarms, bikini line, arms, legs, back and chest.
Women can also use it in the part indicated by the white
dashed line.
It is important to only treat the facial areas where there is visible
thick and dark superfluous hair. Areas with thin fair hair, often
on and under the chin, must not be treated.
Hair rEmoVal proGram
A typical cycle of hair growth can take 18 to 24 months. During this time, more
sessions may be required to achieve permanent hair removal.
Hair removal efficacy varies from person to person and in different body parts,
according to the hair colour and level of tolerance of one's own skin.
Recommended treatment plan in a complete hair growth cycle:
48
•
From session 1 to session 4: sessions must be held two weeks apart
from each other.
•
From session 5 to session 7: sessions must be held four weeks apart
from each other.
•
The subsequent maintenance sessions can be performed from time to
time, when and if necessary, until long-lasting results are achieved.
NotE: the hair removal results will not be enhanced if the same part
of the body is treated more often than recommended (every two weeks).
Dormant hair follicles can be reactivated due to hormonal and physiological
changes. Therefore, occasional hair removal sessions may be required.
The individual reaction depends on the type of hair and biological factors that
may affect the growth cycle of hair. Some people can react quicker or slower
with regards to the recommended hair removal plan.
In any case, a long-lasting result cannot be expected with only one or two
sessions.
the appliance is not effective on white hair. the appliance may be less
effective on natural grey, light blonde and red hair.
iNFormatioN BEForE usE
poWEr lEVEl
The appliance can be set to 5 power levels; 1 (lowest) to 5 (highest), indicated
by 5 power level LEDs (4D).
sEttiNG tHE poWEr lEVEl
Press the power level setting and on/off button. Each time it is pressed, the
EN
49
Publicidad
