Publicidad
Idiomas disponibles
Idiomas disponibles
EN
2. GENERAL USE &
SAFETY WARNINGS
While
using
tools, several basic safety
precautions must always be followed
in order to reduce the risk of fire,
electric shocks and personal injuries.
Read and understand the
manual before start using this
equipment. Save this manual for
future reference.
2.1 - GENERAL
These
preventive
measures
essential for your safety. Always use
this machine with care in a responsible
manner having in consideration that
its user is responsible for eventual
accidents caused to third parties or
their goods.
Make sure that all individuals using this
tool have had the necessary training
and have read and fully understand
these operating instructions. Before
operating it for the first time, its user
must be instructed by the vendor
or a competent person about its
functionalities.
This instruction manual is an integral
part of the equipment and must always
be provided.
Get familiar with the equipment's
control devices and operation. The user
must know how to stop the equipment
immediately.
Always pay attention when operating an
electric tool. A moment of inattention
may result in serious injuries.
Use this equipment only if you are in
good physical and mental conditions.
Do not use it if you are tired or under
the influence of alcohol, drugs or
medication. If you suffer from any
health problem, please ask your doctor
about the possibility of using the tool.
24
Never allow this machine to be used by
children, people with limited physical,
sensorial or mental capabilities, with
lack of experience and knowledge of
this equipment and who is not familiar
with the instructions.
electrical
This equipment must only be
used as described in this
instruction manual. No other use is
allowed besides the described.
Do not overload the power tool and use
the proper tool for each type of work.
Using the power tool for purposes other
than the intended and improper use of
accessories may result in hazardous
situations.
are
For safety reasons, any changes other
than the assembly of accessories
authorized by the manufacturer are
prohibited. Any changes made void the
warranty.
You can obtain any information about
the authorized accessories through
your VITO official distributor.
2.2 - ELECTRICAL SAFETY
Do not use this machine in an
explosive environment,
especially in the presence of
flammable liquids, gases or dusts. Any
power tool may form sparks that might
ignite liquids, gases, or dust.
The supply voltage must match
the technical specifications of
the power tool. Keep the voltage
between ± 5% of the nominal value.
Do not use the power tool in places
where the supply voltage is not stable.
The power cord of the power tool must
be plugged into an electrical outlet
with a differential protection and earth
connection.
If the workplace is extremely hot, damp
or with a high concentration of dust,
the circuit of the power outlet must be
protected with a circuit breaker (30
mA) to ensure the safety of the user.
Do not use the power tool outdoors or
in a wet environment. Entry of water
into an electric tool increases the risk
of tool damage and electric shock to
the user.
Never use the power cable to pull,
carry or unplug the tool. Damaged
power cables increase the risk of
electric shock.
Keep the power cable and plug away
from heat sources, oil, sharp objects
and the rotating accessory.
If the power cord is damaged, it must
be replaced by a qualified technician, it
is not allowed to repair it.
Do not modify the power cable plug.
Use a compatible socket with the plug
of this machine. Do not use any type of
adapter.
The use of extension cords to connect
the power cable is not recommended.
However, if you use an extension, you
should take some precautions, such as:
� Only use extension cords with 3
cables, plugs and sockets with ground
connection;
� The extension cable section must be
proportional to the length and have
equal or higher characteristics to the
machine's power cord;
� Do not use damaged extension cords.
Check them before using and replace
if necessary;
� Always unplug the extension cord
before removing the machine's power
cable.
� When it's an extension cord reel, unroll
the entire cable;
2.3 - BEFORE OPERATING
Make sure that the machine is only used
by who is familiar with the instruction
manual.
To ensure a safe operation, you must:
� Check that all attached tools and
Publicidad
