Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLING GREASE MESH FILTERS
To install filters for the following four steps .
1. Angle the filter into slots at the back of the hood.
2. Push the button on handle of the filter.
3. Release the handle once the filter fits into a resting position.
4. Repeat to install all filters.
CARBON FILTER - not supplied
Activated carbon filter can be used to trap odors. Normally the activated carbon filter should be changed
at three or six months according to your cooking habit. The installation procedure of activated carbon
filter is as below.
1. Before installing or replacing the carbon filters, please remove power to the unit.
2. Press the filter lock and remove the mesh filter.
3. Turn the carbon filter on both side of the motor anti-clockwise. Replace the carbon filters with the new
carbon filters.
4. Place the mesh filter.
5. Connect the power supply to the wall socket.
NOTE:
● Make sure the filter is securely locked. Otherwise, it would loosen and cause dangerous.
● When activated carbon filter attached, the suction power will be lowered.
[ EN ● 14 ]
Version: 3:0
KEN002DH 24.02.2021
open
close
Publicidad
