Husqvarna Z 572x Manual Del Operador página 14

CONTROLS
Ignition Switch
The ignition switch is used to start and stop the
engine. On models equipped with headlights, turn
the key clockwise to ACCESSORY for headlight
use.
Malfunction Indicator Light
The Malfunction Indicator Light (MIL) blinks to
warn when sensors detect an engine system
problem. Refer to the engine manufacturer's
owner's manual for detailed instructions on
determining the type of malfunction and the
appropriate steps for repair.
Blade Switch
To engage the mower deck, pull the knob out;
mower blades are disengaged when the knob is
pressed down.
14
Service Meter
The service meter is located on the left hand
control panel and shows the total operating time
with the blades engaged.
After every 50 hours of operation, an oil can icon
will appear and stay on for two hours, before
an automatic reset occurs. To manually reset
the meter, turn the key off and on five times at
one second intervals. To service the engine and
mower, see the Service Journal of this manual.
Fuel Gauges
Fuel gauges for each fuel tank are located the
right and left control panels.
Fuses
Fuses are located on the left hand side of the
machine and are accessed by tilting the seat
forward. Fuses are flat pin fuses type as used in
automobiles. The 20 A is the primary fuse. The
7.5 A is for the mower deck coupling. The 10 A is
for accessories.