The lamp must never be ignited if the objective-lens or any housing-cover is open, as discharge lamps may
explose and emit a high ultraviolet radiation, which may cause burns.
The maximum ambient temperature T
Operate the device only after having become familiarized with its functions. Do not permit operation by
persons not qualified for operating the device. Most damages are the result of unprofessional operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, lamp explosion, crash etc.
DESCRIPTION OF THE DEVICE
Features
DJ Moving-Head Washlight
• CMY colour mixture
• Motorised colour-wheel with additional 9 dichroic filters plus open
• Rainbow-effect in both directions
• Frost-filter for softer beam
• Beam-shape effect: wide and flat beam can steplessly be rotated by 180°
• Shutter/dimmer unit allowing very smooth dimming and a strobe-effect of 1-10 flash per sec.
• Pan movement range 530°
• Tilt movement range 280°
• Automatic Pan / Tilt position correction
• High luminous-efficiency parabolic reflector
• Light-output via Fresnel lens with a diameter of 150 mm
• Radiation-angle of Fresnel lens manually adjustable between 8° and 22°
• High-quality stepper-motors for smooth movements
• Control-Board with 4-digit display for adjusting the DMX-starting address
• For MSD/HSD 250, MSD 250/2 lamp
• DMX-control via every standard DMX-controller
Overview
= 45° C must never be exceeded.
a
23/64
(1) Projector head
(2) Fresnel lens
(3) Yoke
(4) Control LED
(5) Display
(6) Mode-button
(7) Enter-button
(8) Down-button
(9) Up-button
00026432.DOC, Version 1.2