Speed-I-Marker 940; Important Information; Rechargeable Batteries - Reiner speed-i-Marker 940 Manual De Instrucciones

speed-i-Marker 940

speed-i-Marker 940

Important information

Before operating the speed-i-Marker 940, it is imperative that you read the operating
manual, and especially the safety instructions very carefully. In this way, you can avoid
uncertainties and their accompanying safety risks when working with the speed-i-Marker
940, for the sake of your own safety and to prevent damage to the device.

Rechargeable batteries

Rechargeable battery charging is electronically controlled. This guarantees that the
rechargeable battery cells are charged in a way that is both optimised and thorough.
Charging
Completely charge the rechargeable batteries before using the speed-i-Marker 940 for

the first time. This takes about three hours.
The rechargeable batteries do not reach their full capacity after the first charging. You
must work on the basis that normal standby times will not be achieved.
Reaching full capacity
Full capacity is reached after the rechargeable batteries have been fully discharged
and charged a number of times.
Changing the rechargeable batteries
When removing the rechargeable battery, date and number are reset.
The speed-i-Marker 940 must subsequently be charged for about three hours.
Before changing the rechargeable batteries connect the speed-i-Marker 940 to the
AC adapter. Date and number are retained.
31