Ravelli RBV 7006 Manual De Uso Y Mantenimiento página 46

Rev.0 09-07-19
Pag.46
EN
It is forbidden to make unauthorised changes to the
stove.
Before using the stove it is necessary to know the position
and function of the controls.
If the chimney catches fire you must call the fire brigade.
Only use original spare parts. Any tampering and/or
replacements that have not been authorised by Ravelli
can pose a danger to the user's safety.
In the event of particularly adverse weather conditions,
the safety systems could intervene and switch off the
stove.In any case, doe not disable the safety systems.
Residual risks
The stove was designed so as to guarantee the user's essential
safety requirements.
Safety was integrated into the stove's design and construction as
much as possible.
For every residual risk there is a description of the risk and the zone
or part that is applies to (unless the risk applies to the entire stove
overall). Procedure-related information is also provided on how to
avoid the risk and on the correct use of the personal protective
equipment required by and made compulsory by the Manufacturer.
DESCRIPTION OF THE STOVE
Intended use
The appliance in question is intended for:
operation
Radiant and
convection
heating, by
burning:
The stove is designed and built to work safely if:
• it is installed by qualified staff according to the specific standards;
• it is used within the limits declared in the contract and herein;
• the operating manual procedures are followed;
• routine maintenance is carried out according to the times and
methods set forth;
• extraordinary maintenance is promptly carried out when needed;
• safety devices are not removed and/or bypassed.
! IMPORTANT
Use and maintenance manual RBV 7006 - RBV 7008
allowed fuel
pellet
This stove must be intended for the use it
was specifically designed for.
forbidden
Any fuel
other than
the permitted
ones.
setting
Residential or
Commercial