Youin BK1610 Manual De Usuario página 7

Security
Before each use
Before each ride, you should check that the brakes are secure and working properly.
The handlebar and seat post must be in the correct position and firmly fixed. The
wheels must have enough pressure and all the nuts and bolts must be well tightened.
The battery must have sufficient charge for the use that we are going to give it.
Regular checkups (every 1-2 months)
These controls guarantee the perfect condition of the e-bike and optimal operation.
1- Check that the welds on the frame and fork are in good condition and show no signs
of corrosion.
2- Check that the front and rear brakes are attached to the chassis and brake
effectively.
3- Check tire pressure and tread depth.
4- Check that the rims are well secured and do not have any loose or broken spokes.
5- Check that the handlebar and the seat post are well inserted and firmly tightened.
6- Check that the cables are sufficiently greased and that they have no obstacles in
their path.
7- Check that the battery is charged enough.
Operation
Screen
UP button
ON/OFF button
DOWN button
PAS - Pedal Assist Level
System on/off
Press and hold for a few seconds to turn on your You-ride Texas. Long press
again to turn it off.
Battery charge
VOL - Voltage
CUR - Amperage
WATT - Wattage
Speedometer (Km/h)
ODO - Accumulated mileage
DST - Trip Mileage
TIME - Travel time
7
ENGLISH