Publicidad
Idiomas disponibles
Idiomas disponibles
BEFORE CALLING FOR SERvICE
Problem
Water drips from
nozzle when Steam
Cycle starts.
Steam doesn't
generate but no error
code is shown.
Garments still
wrinkled after
STEAM FRESH
.
™
There are no creases
left on garment after
STEAM FRESH
.
™
Garments have
static after REDUCE
STATIC.
Garments are too
damp or too dry after
REDUCE STATIC.
Garments are not
uniformly damp after
EASY IRON.
Water drips from
door during EASY
IRON.
Steam is not visible
during Steam Cycle.
The drum does not
turn during Steam
Cycle.
Cannot see steam
vapor at the
beginning of cycle.
The display shows
Top plate of the dryer
is very warm.
Odors remain in
clothing after
STEAM FRESH
.
™
(cont.)
Possible Causes
• This is normal.
• Water level error.
• Too many or too different
types of garments in dryer.
• The function of this cycle
is to remove wrinkles from
fabric.
• This is normal.
• Correct drying options not
selected.
• This is normal.
• This is normal.
• This is normal.
• This is normal.
• This is normal.
• MORE TIME button pressed.
• This is normal.
• STEAM FRESH
did not
™
remove odor completely.
Solutions
• This is steam condensation. The dripping water
will stop after a short time.
• Unplug dryer and call for service.
• Small loads of 1 to 5 items work best.
• Load fewer garments. Load similar-type garments.
• Use an iron to make creases.
• Depends on individual moisture level in skin.
• Select load weight manually before starting
REDUCE STATIC option.
• Depends on the amount or type of garments.
• This is steam condensation on door surface.
• Steam vapor is difficult to see when the door is
closed.
• The drum is turned off so that the steam vapor
remains in the drum.
• Steam is released at different stages of the cycle
for each option.
• Pressing the MORE TIME button several times will
set the cycle for a big load such as a comforter.
• The top plate of the dryer will get warm during
steam functions.
• Fabrics containing strong odors should be
washed in a normal cycle.
37
Publicidad
