22
USING YOUR WASHING MACHINE
USING YOUR WASHING MACHINE
Basic operation
1
Load the laundry into the washing machine and close the door.
2
Press
- The lights around the cycle selector knob will illuminate and a chime will sound.
Turn
3
- The proper default option is automatically set according to the wash cycle. See page 23, Cycle
- See page 24, Main cycle, for details on the wash cycles.
- To change the options, press the option button and select the desired option. See page 25,
- Skip to step 4 to use the default setting without changing the options.
4
Add the proper amount of detergent and additions (bleach, softener) into the detergent dispenser
drawer.
- See page 20, Using detergent/fabric softener, for more details on using detergent.
5
Press
- The washing machine will start.
6
When the melody plays, the wash cycle is finished.
- When the washing cycle is finished, the door will unlock. Open the door and remove the
- Make sure to check around the door seal when taking out the finished load. Small items may
WARNING
y To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this appliance.
NOTE
y The front-load washing machine rotates the laundry in a way that allows it to use less water while still fully saturating your
clothing. It is normal to not be able to see water during the wash cycle.
y If the temperature or the water level inside the machine is too high, the door locks and cannot be opened. To open the door
while washing, use the Rinse + SPIN feature.
A
.
B
to the desired cycle.
guide, for more detailed default options for each cycle.
Setting options before cycle, for more details on options.
C
.
laundry immediately.
be caught in the door seal.