Publicidad
Idiomas disponibles
Idiomas disponibles
40 OPERATION
Special Functions
Some cycle option buttons also activate secondary
functions. These special functions are marked with an
asterisk (*). Press and hold the option button marked
with the special function to activate it.
* Control Lock
Use this option to prevent unwanted use of the dryer
or to keep cycle settings from being changed while
the dryer is operating.
Press and hold the button marked *Control Lock for
3 seconds to activate or deactivate the Control Lock
function. The Control Lock icon will be shown in the
display, and all controls will be disabled except the
POWER button.
NOTE
Once set, Control Lock remains active until it is
manually deactivated. Control Lock must be turned off
to run another cycle. To deactivate Control Lock, press
and hold the *Control Lock button for 3 seconds.
* Damp Dry Signal
With this option, the dryer will signal when the load
is approximately 80% dry. This allows you to remove
faster- drying lightweight items or items that you
would like to iron or hang while still slightly damp.
* Default On/Off
This option allows the Energy Saver settings to be
changed. To run a Normal cycle without the Energy
Saver option, press and hold the Energy Saver button
for three seconds. ON or OFF appears in the display.
* SIGNAL
Press and hold the Dry Level button for 3 seconds to
adjust the volume of the signal. Press and hold the
button repeatedly to adjust the volume of the melody.
When no signal is heard, the signal is off. The volume
settings are ON – OFF. The signal volume can be
adjusted at any time as long as the dryer is turned
ON.
Publicidad
