ACDelco ARI20155 Manual Información Del Producto página 9

1English1
ASSEMBLY
INSTALLING OR REMOVING BATTERY PACK
Fig. 2
TO REMOVE BATTERY PACK: Depress the battery release button (C) and pull
battery pack (A) out of tool (B). (see Fig. 2)
TO INSTALL BATTERY PACK: Push battery pack (A) onto tool until it locks in
place. (see Fig. 2)
INSTALLING BITS
Always follow the procedure below to install a driver bit.
1. Pull the guide sleeve forward. (see Fig. 3-A)
2. Insert the bit into the hexagonal hole.
3. By releasing the guide sleeve it will return to its original position.
REMOVING BITS
Always follow the procedure below to remove a driver bit.
1. Pull the guide sleeve forward. (see Fig. 3-A)
English -8