Publicidad
On number display
Sur l'écran numéraire
En el display numérico
0
On PC screen
Sur l'écran de PC
En la pantalla de la PC
Foreign particle is inserted into cord socket for foot control plug.
Remove foreign particle.
Twin needle mode switch is pushed, while patterns without
twin needle capability are selected.
Push the switch again.
Embroidery unit is installed with small hoop attached.
Remove embroidery unit and small hoop and then re-
attach embroidery unit or remove small hoop and turn off
and on power switch.
Needle is lowered when starting embroidery sewing.
Raise needle by rotating hand wheel toward you.
Foot control plug is pushed in and pulled out while sewing
patterns.
Don't touch the plug while sewing.
Embroidery sewing is completed.
Check cable and power switch.
Check that USB cable is connected and power switch is
turned on.
Bobbin winder is in operation.
Publicidad
