Publicidad
Idiomas disponibles
Idiomas disponibles
Battery Tool Use and Care
a) Recharge only with the charger specified by D
charger that is suitable for one type of battery pack may create
a risk of fire when used with another battery pack.
b) When battery pack is not in use, keep it away from other
metal objects like paper clips, coins, keys, nails, screws,
or other small metal objects that can make a connection
from one terminal to another. Shorting the battery terminals
together may cause burns or a fire.
c) Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally occurs,
flush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause
irritation or burns.
Safety Information for Imaging
Thermometers
WARNING:
• Do not disassemble or modify the imaging thermometer.
Have the imaging thermometer serviced by a qualified
repair person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained. If you
need assistance contact D
WALT at 1-800-4-D
E
433-9258) or go to http://www.dewalt.com on the Internet.
• Do not operate the imaging thermometer in explosive
atmospheres, such as in the presence of flammable liquids,
gases, or dust. Imaging thermometers create sparks which may
ignite the dust or fumes.
• The imaging thermometer should only be used with
specifically designated D
WALT batteries. Use of any other
E
batteries may create a risk of fire.
• Store the imaging thermometer out of reach of children and
other untrained persons. Tools are dangerous in the hands of
WALT. A
E
untrained users.
• Do not remove or deface warning labels.
• Do not use imaging thermometer for testing temperatures
of cooked or uncooked food.
• Do not touch surfaces to confirm hot temperature readings.
• Do not use for taking human or animal body temperatures.
WARNING: Burn hazard. The reading may not be accurate if the
imaging thermometer is in the presence of strong electromagnetic
fields (such as arc welders, induction heaters, ratio transmitters, etc.).
Do not use the imaging thermometer under these conditions.
WARNING: The imaging thermometer measures surface
temperature only. Objects behind the surface may have significantly
different temperatures, posing a burn or frostbite hazard.
WARNING: See emissivity information for actual temperatures.
Reflective objects result in lower than actual temperature
measurements and can pose a burn hazard.
WARNING: Do not expose imaging thermometer to excessive
heat such as sunshine, fire or the like.
CAUTION: When not in use, place imaging thermometer on
its side on a stable surface where it will not cause a tripping or
WALT (1-800-
E
falling hazard. Some tools with large battery packs will stand upright
on the battery pack but may be easily knocked over.
NOTICE: Modifications not authorized by the manufacturer may void
user's authority to operate this device.
NOTICE: To avoid damage to the imaging thermometer, do
not leave it exposed to high temperature environments or heat
sources, for example, in a vehicle in the sun. Always operate the
imaging thermometer within the operating range noted in the
specification chart.
2
Publicidad
