Publicidad
Idiomas disponibles
Idiomas disponibles
GENERAL CHARGING PARAMETER SETUP
25.
The charger is setup for maximum versatility. All charging parameters start at factory default. Once a parameter is changed then it will remain
changed at that setting until it is changed again. Parameters have limits depending on the battery type. All changes should be changed with
great care to ensure not to damage the battery.
To change a parameter, press and hold the ON/OFF key. Use the UP/DOWN arrow keys to place the caret (arrow) on the parameter desired to
change. Press "Select", and caret will start to flash. Now use the arrow keys to change the parameter to the desired values within the limits
allowed. Once the parameter is set press the "Select" key to lock that value in memory.
Battery Type: Use this to select the battery type that needs to be charged. When charger powers up it defaults to AGM, if the battery type is
unknown the AGM is usually a safe charge to use. To change parameters for a battery or mode then that item must first be selected, then all the
parameters for the item will change to match what they are set for. Not all parameters are needed for every battery type.
Maximum Current: Limits current output of the charger. Can be used to limit heating of the battery. Some batteries have limits on maximum
current for charging.
Hold Voltage: Depending on the battery type, this could be the maximum voltage the battery is charged at, or it may be the gassing point where
the current is reduced to charge the battery for maximum charge efficiency.
Run Time: This would be the maximum charge time allowed for charging the battery.
Safety Voltage: If this voltage is reached, and cannot be reduced, charge is terminated.
Finish Current: Depending on the battery type, this current is the current the charge is terminated on, or the current used to finish the charge.
Time Post Gassing: This is the maximum time allowed after reaching the hold voltage.
Finish Types:
● None: When charge is done just turns off.
● Plse/Time (PULSE/TIME): After charge is complete, charger turns OFF and remains OFF until the selected time is reached. Charger will
then turn back on until the hold voltage is reached, at which time it will turn off.
● Plse/Vlts (PULSE/VOLTS): After charge is complete, charger turns OFF and remains OFF until the battery voltage drops to the selected float
voltage. Charger will then turn back on until the hold voltage is reached, at which time it will turn off.
● Float: After charge is complete, charger turns OFF and remains OFF until the battery voltage drops to the float voltage. Charger will then turn
on as necessary to hold the voltage at the float voltage until the battery is removed.
MAINTENANCE INSTRUCTIONS
26.
Worn clamps should be replaced. Worn parts can lead to poor connections and present a safety hazard. See parts list for part number of D.C.
Cord kit. Any Maintenance or repair of this unit that involves disassembly of the cabinet should be done only by a qualified service person.
Incorrect reassembly may result in a risk of electric shock when the unit is subsequently used.
PRODUCT WARRANTY
Associated Equipment Corp. warrants only to the original End User/Purchaser that under normal use, care and service, the Equipment (except as
otherwise provided herein) shall be free from defects in material and workmanship for the Warranty Period of 2 (TWO) YEARS PARTS AND LABOR, 3
(THREE) YEARS TRANSFORMER AND RECTIFIER (PARTS ONLY AFTER 2ND YEAR). All Warranty Periods are from the date of original
invoice/purchase (dated sales receipt required). The Associated Equipment Warranty is NOT extended to products, which in Associated Equipment's sole
judgement, have been misused, abused or modified from their original state.
ASSOCIATED EQUIPMENT'S OBLIGATIONS UNDER THIS WARRANTY ARE LIMITED SOLELY TO THE REPAIR OR, AT SELLER'S OPTION,
REPLACEMENT OF EQUIPMENT OR PARTS WHICH TO SELLER'S SATISFACTION ARE DETERMINED TO BE DEFECTIVE AND WHICH ARE
NECESSARY, IN SELLER'S JUDGEMENT, TO RETURN THE EQUIPMENT TO GOOD OPERATING CONDITION. NO OTHER WARRANTIES
EXPRESS OR IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AND ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED.
SERVICE CENTERS: For a complete listing of authorized service centers, contact Customer Service or consult the online listing at
www.associatedequip.com. While most products may be serviced by Associated's authorized service centers, some products may only be serviced
by the factory.
4
Publicidad
