Magerit Metro Manual De Instrucciones página 20

External clock sync
METRO can use its internal clock or an external one. In order to use an external clock signal from another
module, connect a cable between that module and the
menu (steps or euclidean), you will see that the word "BPM" is replaced by "EXT". Below is the detection
type: Beat or 1/16.
METRO also detects when the external clock module has stopped (in real time). A pause symbol will
appear on the display 2 seconds later. Once the external module plays the clock signal again, the module
will detect it.
The maximum value (high) of the clock signal must be greater than 3.5 V.
METRO detects that the exter-
nal clock module is paused.
input of METRO. If you are in the sequencer
It indicates that an external clock
signal is connected
EXT
1/16 x2
In Beat mode, every time
METRO receives a clock pulse,
the sequencer will advance
one step.
In 1/16 mode, every four
clock ticks (4 clocks), the
sequencer will advance one
step.
20