Publicidad
Idiomas disponibles
Idiomas disponibles
Assemble Vent Hose(s)
1.
Assemble vent hose(s)
Vent hose
Round
connector
Extend both ends of the vent hose a little bit.
Thread a round connector clockwise onto one end of the vent
hose. Thread a window connector clockwise onto the other end
of the vent hose.
For dual vent models, repeat for second vent hose.
2.
Attach vent hose(s) to air conditioner
Slide the the round end of the vent hoses into the hose ports on
the air conditoner.
Dual vent model shown.
3.
Lock vent hose(s) in place
Turn the locking knob to the LOCKED position to secure the vent
hose in place. For dual vent models, repeat for other side.
6
4.
Attach vent hose(s) to slider panel
Window
connector
Position the air conditioner in the desired location.
Extend the vent hose enough to reach from the air conditoner
to the window. Be sure there are no sharp bends or kinks in the
hose.
Press the window connector end of the vent hose into the
opening on the slider panel as shown. It will clip into place.
Single vent model shown. For dual vent models, see below for
hose placement.
Dual vent hose placement
Vertical Window
Installations
Slider panel
Window connector
Standard Window
Installations
Publicidad
