Publicidad
Idiomas disponibles
Idiomas disponibles
Thank you for choosing this Friedland product. Please use the following instructions to
ensure correct installation and use. Keep these notes in a safe place for future reference
Checking pack contents
Unpack your chime kit and identify the
following parts:
¬ Chime
Chime bracket
2 x fixing screws for chime
2 x wall plugs
You will need:
A 4mm cross-head screwdriver
A 6mm masonry drill
4 x LR14 'C' Alkaline batteries
Quick start
You need to do the following to get started:
Fit the chime batteries
Check the chime switch setting
Check the volume setting
When you operate the bell push, the chime will sound and the 1st Icon will flash. If you have additional
pushes or you want to assign a different icon to your push, you will need to follow the programming procedure.
Libra + 200m Portable chime
Safety
Before proceeding with the installation,
please note the following safety warnings:
¬ Always follow the manufacturer's advice
when using power tools and wear suitable
protective equipment (e.g. safety goggles)
when drilling holes etc.
¬ Before drilling holes in walls, check for
hidden electricity cables and water pipes,
the use of a cable/pipe locater maybe
advisable if in doubt.
2
.
Publicidad
