EINHELL TE-AP 18 Li Solo Manual De Instrucciones Original página 32

Protection from environmental infl uences
1. Wear suitable work clothes. Wear safety gog-
gles.
2. Protect your cordless tool and the battery
charger from moisture and rain. Moisture
and rain can cause dangerous cell damage.
3. Do not use the cordless tool or the battery
charger near vapors and infl ammable liquids.
4. Use the battery charger and cordless tools
only in dry conditions and an ambient tempe-
rature of 10-40°C.
5. Do not keep the battery charger in places
where the temperature is liable to reach over
40°C. In particular, do not leave the battery
charger in a car that is parked in the sunshine.
6. Protect batteries from overheating. Over-
loads, over-charging and exposure to direct
sunlight will result in overheating and cell
damage. Never charge or work with batteries
which have been overheated – replace them
immediately if possible.
7. Storage of batteries, battery chargers
and cordless tools. Store the charger and
your cordless tool only in dry places with an
ambient temperature of 10-40°C. Store your
lithium-ion battery pack in a cool, dry place at
a temperature of 10-20°C. Protect them from
humidity and direct sunlight. Only place fully
charged batteries in storage (charged at least
40%).
8. Prevent the lithium-ion battery pack from free-
zing. Battery packs which were stored below
0°C for more than 60 minutes must be dispo-
sed of.
9. When handling batteries beware of electro-
static charge: Electrostatic discharges cause
damage of the electronic protection system
and the battery cells. Avoid electrostatic char-
ging and never touch the battery poles.
Rechargeable batteries and cordless electric
machines and tools contain materials that are po-
tentially harmful to the environment.
Anl_SA_TE_AP_18_Li_SPK8.indb 32 Anl_SA_TE_AP_18_Li_SPK8.indb 32
GB
Universal Cordless Saw
•
Hold the equipment by the insulated handles
when carrying out work during which the
plug-in tool could strike concealed power
cables. Contact with a live cable may also
make the metal parts of the equipment live
and cause an electric shock.
•
Keep the saw in a safe place and out of the
reach of children.
•
When sawing, always wear safety goggles,
protective gloves and ear muffs; use a dust
mask on dusty jobs.
•
Never leave any keys or adjustment spanners
in position on the saw. Before switching on,
check that all keys and adjustment spanners
have been removed.
•
Secure the workpiece (with a clamp) so that it
cannot slip.
•
It is prohibited to use the saw on asbestos
materials.
•
Please note the accident prevention regulati-
ons in force in your country.
•
Use only original spare parts.
•
Repairs are to be carried out by qualified
electricians only.
•
The level of noise at the workplace may ex-
ceed 85 dB(A). In this case you will need to
introduce noise protection measures for the
user.
•
Make sure of your footing. Avoid abnormal
working positions.
•
Keep your electric tool out of the rain. Never
use electric tools in wet or damp conditions,
and never use them near inflammable liquids.
•
Keep your workplace tidy.
•
Wear suitable clothing. Never wear loosefit-
ting clothes or jewelry. Use a hair-net on long
hair.
•
For your own safety, use only the
manufacturer's accessories and attachments.
•
Use only sharp saw blades that are in perfect
condition. Replace bent and cracked saw bla-
des immediately.
•
After switching off the saw, do not press
against the side of the blade to bring it to a
halt.
•
Always cut at a steady rate of progress. This
will prevent accidents and prolong the life of
your saw and the blade.
•
Use only a damp cloth to clean your saw. Do
not use any aggressive agents for cleaning
purposes.
•
Check your saw to ensure that it is in good
working order. If the saw fails to work properly,
have it checked. Leave all maintenance and
- 32 -
04.10.2017 08:24:54 04.10.2017 08:24:54