GE PD968SPSS Instrucciones De Instalación página 4

3 ­ W HEN INSTALLING RANGE IN COUNTERTOP CUT OUT TO THE WALL
If­the­counter­opening­extends­to­the­walls,­it­will­require­maintop­filler­kit­(JXS66XX)­or­back-guard­kit­(JXS36XX,­
JXS39SS,­or­JXS32XX)­to­close­the­gap.­Refer­to­the­filler­or­back­guard­kit­instructions­for­installation­details.
NOTE:­If­the­countertop­is­greater­than­25"­it­will­show­a­gap­between­the­back-guard­and­wall­or­between­
filler­kit­and­the­wall.
25"
10-3/8" from
countertop to
anti-tip support
29-15/16" Min.
30-1/16" Max.
4 ­ P REPARING THE RANGE
Remove Oven Door
Door­removal­is­not­a­requirement­for­installation­of­
the­product­but­is­an­added­convenience.­To­remove­
the­door:
1.­­­ O pen­the­oven­door­as­far­as­it­will­go.
2.­­­ P ush­both­hinge­locks­toward­the­door­frame­
to­the­unlocked­position.­This­may­require­a­flat­
blade­screwdriver.
Hinge
Slot
Hinge Arm
NOTE: The oven door is very heavy. Be sure you have a firm grip before lifting the oven off the hinges.
Use caution once the door is removed. Do not lay door on its handle. This could cause dents or
scratches.
All manuals and user guides at all-guides.com
Installation­Instructions
Must be Flat
Wall
9/16"
Must be Flat
Hinge Lock
(Unlocked
Position)
9/16"
An­additional­anti-tip­bracket­
support­must­be­mounted­to­
the­rear­wall­of­the­cutout.­
The­anti-tip­bracket­support­
is­typically­a­2x4­piece­of­
lumber­screwed­directly­into­
Anti-Tip Support
the­wall­studs.­The­anti-tip­
bracket­support­must­be­able­
to­withstand­200­lbs­of­force­
at­the­engagement­point.
3.­­­ P lace­hands­on­both­sides­of­the­
door,­and­close­the­door­to­the­
removal­position.­This­is­half­way­
between­the­broil­stop­and­fully­
closed.
4.­­­ L ift­the­door­up­and­out­until­the­
hinge­arms­clear­the­slots.
Hinge­
Clears­Slot
4
WARNING
­