Gabarron IDP-200 Instrucciones De Instalacion Y Uso página 6

2.- INSTALLATION
Open the box to take out the heater and all the accessories.
1.- Insert the lower post assembly (11) into the base assembly (16) and then fix it
tightly by means of 4 M6X30 screws, and insert
the clamp (12) into the lower post (11).
2.- Join the Lower Post Assembly and the Middle Post (9) together with 3-M5X6 screw.
3.- Join the Upper Post Assembly (7) and the Middle Post (9) together with 3-M5X6.screw.
4.-Join the Heating Element Assembly (1) and the Upper Post Assembly (7)
together ,then fix them tightly by rotating the Knob, and put the power cord supply
into the clamp.