Descargar Imprimir esta página

Sylvania LC225SC9 Manual Del Propietário página 4

Publicidad

Idiomas disponibles

Idiomas disponibles

I
NTRODUCTION
Supplied Accessories
owner's manual
(1EMN23739)
If you need to replace these accessories, please refer to the part No. with the illustrations and call our toll free
customer support line found on the cover of this manual.
Depending on your antenna system, you may need different types of combiners (mixers) or separators (splitters).
Contact your local electronics store for these items.
Attaching the Stand
You must attach the stand to the unit to display upright. Be sure the front and rear of the stand match the proper direction.
1
Spread a thick and soft cloth over a table. Place the main
unit face down onto it.
Make sure not to damage the screen.
To Remove the Stand from this Unit
Grip the levers on the bottom stand and remove the stand
from the unit slowly.
Be careful not to drop the stand when you remove it.
Note:
• When attaching the stand, ensure that all screws are tightly fastened. If the stand is not properly attached, it could cause the unit to fall,
resulting in injuries as well as damage to the unit.
• Make sure to use a table which can support the weight of this unit and is larger than this unit.
• Make sure the table is in a stable location.
Symbols Used in this Manual
The following is the description for the symbols used in this manual.
Description refers to:
: Digital TV operation
DTV
If neither symbol appears under the function heading, operation is applicable to both.
Trademark Information
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby
Laboratories.
Product that have earned ENERGY STAR® are designed to protect the environment through superior energy efficiency.
4
EN
All manuals and user guides at all-guides.com
remote control
(NF606UD)
: Analog TV operation
TV
batteries
(AA x 2)
2
Insert the stand all the way to the main unit slowly until
it clicks.
Make sure not to put the AC cord between the stand
and the unit.
lever

Publicidad

loading