Publicidad
PLAYING A DVD VIDEO
OR AN AUDIO CD
Getting started
Turn on the power of the TV, amplifier and any other
components which are connected to the DVD player.
(Change the input system to suit the DVD player, and
check that the sound volume is correct.)
1
Press the POWER button.
G
The power will turn on.
2
Press the OPEN/CLOSE button.
G
The disc loading tray will open.
3
Press the DISC SELECT button repeatedly or
the DISC Number button.
G
The desired disc tray moves to the front position.
4
Place a disc into the tray.
G
Make sure the disc is sitting properly in the correct
recess, with the label side up.
G
Repeat steps 3 and 4 to load more discs.
Left side tray
5
Press the PLAY button.
G
The tray will close automatically, and playback will
then start from the first chapter or track of the disc on
the left side. You may need to press the PLAY button
for some discs when the tray has been closed by
pressing the OPEN/CLOSE button.
G
If the disc has not been set on the tray, the DVD
player will play the disc which is set on the right side
tray.
G
When you want to select the other disc, press the
DISC SELECT button repeatedly or the DISC Num-
ber button for your desired disc.
G
When you play back the DVD which a title menu is
recorded, the menu may appear on the screen. In this
case, refer to "USING THE TITLE MENU".
6
Press the STOP button to stop play.
All manuals and user guides at all-guides.com
PLAYING A DISC
DVD
CD
Right side tray
- 13 -
Notes
G
A "prohibited icon" may appear at
the bottom right on the TV screen
during operation, warning that a
prohibited operation has been en-
countered by the DVD player or
the disc.
G
If a disc is dirty or has scratches, the pictures may
appear distorted and the playback operation may
stop. In such cases, clean the disc and unplug the
power cord and then plug it again before resuming
playback.
G
With DVDs that use some titles for playback pro-
gram signals, playback may start from the second ti-
tle, or it may skip these titles.
G
When the DVD player has finished playing the cur-
rent disc, it will go to the stop mode.
G
You can not change the other disc during playback.
After the DVD player is stopped, press the
OPEN/CLOSE button.
USING THE DVD MENUS
Some DVDs contain their own menus, such as a guid-
ance menu which describes the contents of the disc or a
selection menu for sound, language and other custom-
ized settings.
1
Press the MENU button.
The DVD menu will appear.
G
2
Select the desired title.
G
Press the arrow buttons (M/L/B/s) to change the
setting, and then press the ENTER button.
3
Playback will start from the selected title.
DVD
EN
0D05
Publicidad
