Ravelli RBC 810 Manual De Uso Y Mantenimiento página 70

Rev.1 14/02/18
Pag.70
EN
1- Remove the vermiculite stop
2-Deep cleaning
Pulire qua
Smoke conduit cleaning
! IMPORTANT
step action
1
Open the hatches.
2 Clean the ashes, eventually use a brush or similar and reassemble everything.
Note: the hatches are equipped with gaskets, therefore, before reassembling them, make sure that the gaskets are not
worn.
Use and maintenance manual RBC 810 - RBC 812
This operation must be carried out by a Ravelli Assistance Centre.
Schedule this type of cleaning with the Ravelli Assistance Centre.
The smoke conduit must be cleaned every 3 months.
Pulire qua