Safety Warnings - Marmitek TMD4 Modo De Empleo

Marmitek MicroModule TMD4
Marmitek X-10 transmitter for four addresses and the
commands ON/OFF and DIM/BRIGHT

SAFETY WARNINGS

• The wiring of your electrical installation is live (230 V) and
extremely dangerous. Never connect the module when
plugged into the mains. Always turn off the main switch before
starting the installation.
• This product is for professional use and should be installed by
a certified installer.
• To prevent short circuits, this product should only be used
inside and only in dry spaces. Do not expose the components
to rain or moisture. Do not use the product close to a bath,
swimming pool etc.
• Do not expose the components of your systems to extremely
high temperatures or bright light sources.
• Do not open the product: the device contains live parts. The
product should only be repaired or serviced by a qualified
repairman.
• In case of improper usage or if you have opened, altered and
repaired the product yourself, all guarantees expire. Marmitek
does not accept responsibility in the case of improper usage of
the product or when the product is used for purposes other
than specified. Marmitek does not accept responsibility for
additional damage other than covered by the legal product
responsibility.
• This product is not a toy. Keep out of reach of children.
• Adapters: Only connect the adapter to the mains after
checking whether the mains voltage is the same as the values
on the identification tags.
• Automatic switching devices provide comfort, but can also be
dangerous. They can surprise people or can ignite clothing
hanging over an electric heat source. Please be careful and take
appropriate measures to avoid accidents.
TMD4™ 3