Qlima FFB 8060 Instrucciones De Uso página 18

• In order to avoid overheating, do not cover
• Be sure the table/floor you are placing this
• Installation only in a location which is
• Convection air slots and rear ventilations
• Do not put any flammable items on top of
• This product can NOT be fixed to a wall of
USAGE METHODS
Assembly of the appliance
FFB 8060 (Fig 1)
Parts List:
•
•
•
•
•
•
•
1.
2.
3.
4.
5.
6.
7.
Safe Way to (re-) fill the Appliance
•
•
•
4
18
that they do not play with the appliance.
the device.
appliance can bear its weight
protected against cross aeration / air draft
of the appliance shall nog be covered /
obstructed
the appliance
roof
Fireplace body
1.5L double-layer Burner
Control tool
Screws (5 x 30mm)
Tempered Glass
Screw (M6 x 10)
Screw cap
Unpack the fireplace and accessories. Check the content for completeness
and any damage incurred in transit. Keep children away from the packing.
Only install or place on a solid floor of non-flammable material
Remove all packaging and information material before assembly
Assemble the fireplace base together and secure the glass onto the both
sides of the fireplace body with 6 screws.
Read warning sticker covering the burner, then remove the sticker
If something is broken or damaged: do not use the appliance. Return the
appliance to your store immediately.
Place the burner into the burning chamber of the fireplace body.
Before refilling the appliance after extinguished fire: make sure to WAIT FOR
AT LEAST 10 MINUTES.
NEVER refill with a burning fire! (Fig. 2)
Adjust the sliding lid to its widest opening (Fig. 3)
2x
1x
1x
4x
2x
6x
6x