TFA LUMATIC GUARD Instrucciones De Uso página 2

TFA_No. 43.2033_Anleitung_03/13
LUMATIC GUARD
LED multi-function safety lamp
A: 5-LED-lights (above)
B: 15-LED-lights (in front)
C: ON/OFF button
D: Light sensor
E: IR motion sensor
F: Induction contact for
the charging station
RoHS
A
Thank you for choosing this instrument from TFA.
1. Before you start using it
• Please make sure to read the instruction manual carefully.
• Following and respecting the instructions in your manual will prevent dam-
age to your instrument and loss of your statutory rights arising from defects
due to incorrect use.
• We shall not be liable for any damage occurring as a result of not following
these instructions.
• Please take particular note of the safety advice!
• Please keep this instruction manual for future reference.
2. Field of operation and all the benefits of your new instrument at a
glance
• Night light with IR motion sensor (15 LEDs)
• Flashlight - always at hand in the right place, at once light without turning
on (5 LEDs)
• Automatic emergency lighting during a power outage
• Comfortable charging at the socket (by induction)
• Built-in rechargeable battery
• Light time about 6 - 7 hours
3. For your safety
• The product is exclusively intended for the field of application described above.
The product should only be used as described within these instructions.
• Unauthorised repairs, modifications or changes to the product are prohibited.
• The product is for home use only.
Caution!
Risk of injury:
• Do not shine directly into the eyes with the flashlight.
• Keep this instrument and the charging station out of the reach of children.
• Protect the flashlight from overheating! Do not leave the flashlight on unat-
tended.
• After removing the flashlight from the charging station, the lower side is
heated by charging. Make sure that the flashlight is cooled off before touch-
ing it. Turn off the flashlight after use.
Risk of burns!
Caution!
Risk of electrocution:
• Plug the charging station only into a socket installed in regulation manner and
with a mains voltage of 230V!
• The charging station must not come into contact with water or moisture. Only
suitable for operation in dry interiors.
• Do not use the charging station if the housing or the main adapter is damaged.
• Keep the charging station out of reach of persons (including children) who can-
not fully appreciate the potential risks of handling electrical equipment.
• Pull the charging station out of the socket immediately if any fault occurs or if
the charging station is not used for a lengthy period.
• Only use the supplied charging station for the flashlight.
Important information on product safety!
• Do not place the unit near extreme temperatures, vibrations or shocks.
4. Operation
• Please charge it fully before the first use.
• If the illumination decreases, put the flashlight into the charging station.
4.1 Charging of the LED multi-function safety lamp
• Plug the charging station into a socket.
• For charging put the flashlight with the lower side into the charging station.
The 15-LED lights show to the front.
• For fully charge put the flashlight at least 8 hours in the connected charging
station.
• The charging process is completed automatically.
4.2 Use as a LED flashlight
• Take the flashlight out of the charging station.
• When taken out, the 15 LED lights turn on automatically.
21.03.2013 12:07 Uhr Seite 2
F
E
D
C
B
Operating Instructions
• Press the ON/OFF button again, the 15 LED lights turn off and the 5 LED lights
(above) turn on.
• To switch off the flashlight press the ON/OFF button again.
4.3 Use as an infrared motion sensor
• Plug the charging station into a wall outlet. For the best sensor effect the
socket should be located about 1.5 m above the ground.
• Put the flashlight with the 15-LED light forward into the charging station.
• Does the infrared motion sensor detect a movement about 2 to 3 m in front
of the sensor, the 15-LED lights will turn on automatically.
• The flashlight has a light sensor to turn on the light automatically only at
dark.
• The flashlight will turn off automatically after a few seconds.
4.4 Use as an emergency light
• By power outage the 15-LED lamps turn on automatically.
5. Waste disposal
Never dispose of empty batteries and rechargeable batteries in
household waste.
As a consumer, you are legally required to take them to your retail
store or to appropriate collection sites depending to national or
local regulations in order to protect the environment.
The symbols for the heavy metals contained are: Cd=cadmium,
Hg=mercury, Pb=lead
This instrument is labelled in accordance with the EU Waste Electri-
cal and Electronic Equipment Directive (WEEE).
Please do not dispose of this instrument in household waste. The
user is obligated to take end-of-life devices to a designated collec-
tion point for the disposal of electrical and electronic equipment, in
order to ensure environmentally-compatible disposal.
6. Specifications
LED lamps
ϕ 5 120°LED / 1200 – 1300 mcd / 0,07 W
5-LED-lights:
ϕ 5 15°LED / 15000 – 17000 mcd / 0,07 W
15-LED-lights:
Range: up to 3 m
Operating time: 5-LED-lights – more than 8 hours
15-LED-lights – more than 3,5 hours
Infrared motion sensor
Distance / angle: 2 – 3 m /60°
≤5µA
Quiescent current:
Illumination time: approx. 20 seconds
Power consumption: Charging station AC 220V / 50HZ / 0.015A
Battery: 052030 Li-ion Battery 3.7 V, 250MAH
Charging time: 8 hours
Dimension: 50 x 35 x 153 mm
Weight: 92 g (instrument only)
TFA Dostmann GmbH & Co. KG, Zum Ottersberg 12, D-97877 Wertheim.
No part of this manual may be reproduced without written consent of TFA Dost-
mann. The technical data are correct at the time of going to print and may
change without prior notice.
www.tfa-dostmann.de
Kat. Nr. 43.2033
03/13