Amplicomms BigTel 50 Alarm Plus Guía De Usuario página 116

Recording an outgoing alert message
• Press
• Select RECORD MESSAGE using
• Press and hold down
• Release
Playing the outgoing alert message
• Press
• Select CHECK MESSAGE using
Deleting the outgoing alert message
• Press
• Select CHECK MESSAGE using
• Press
Storing emergency call
Store emergency number into phone book, please refer to "Recording
Phone book entries" (Page 112 and 113) and ensure "ALARM NUMBER"
is selected.
Automatic emergency calls
The automatic emergency call can be initiated by pressing and hold (2
seconds) the buttons
emergency call unit.
If no phone number has been assigned to
dialled but a loud warning signal is issued from the telephone.
Note: Pay attention that the alarm bracelet is within range of the
telephone�
The battery in the Alarm bracelet should always be full�
STARTING/CANCELLING the emergency call
The following procedure will start the emergency call
1. Press
BT50 for 2 seconds to activate the emergency call.
.
to end recording.
.
.
during playback. The message will be deleted.
on the telephone or the button on the
or SOS button (1) on the bracelet during standby of
/
when you speak your message.
/
/
no
116
and press
and press
and press
phone number is
.
.
.