Bahco BCL33D1 Manual De Instrucciones página 7

5. SPECIFIC SAFETY RULES AND/OR SYMBOLS
Recycle
...................
Do Not Throw in Garbage
..................
a.c.
Alternating Current
...............
W
Watts
....................
mm
Millimeter
..............
kg-cm
Kilograms - Centimeter
.....
/min
Revolutions or Reciprocations per Minute
............
6. FEATURE
1
2
3
4
7. OPERATING INSTRUCTIONS
Removing or Installing Battery Pack
1. Always switch off the machine before insertion or removal of the
2. To remove the battery pack, push the button on the battery pack and
3. To insert the battery pack, align the tool unit slides with the battery
4. Do not force the battery pack in sliding it into tool unit. If the battery
Charging the Battery Pack
1. Connect the plug to the charger before charging.
2. Plug the fast charger into the power source.
3. Slide the battery pack into the charger as the arrow direction shown on the charger.
4. Push the battery pack into place and make sure the red light on the charger is "ON". The
battery pack is now starting the charging cycle.
5. A fter finish the charging cycle, the light will turn into green. The battery pack is now ready
for use.
battery pack.
pull the tool unit from the battery pack in the direction.
pack sliding groove and push the tool unit into place.
The tool unit can be slide into battery pack in two directions.
pack does not slide in easily, it is not being inserted correctly.
• 7
Class II Tool
...........
V
Volts
..............
Hz
Hertz
..........
kg
Kilograms
...........
d.c.
Direct Current
.......
ft-lb
Foot-Pound
.....
5
6
1. Torque Adjustment Ring
2. Keyless Chuck
3. LED
4. Main Switch
5. High/Low Speed Rod
6. Forward/Reverse Rod
•