Bahco BCL33D1 Manual De Instrucciones página 9

8. TOOL OPERATION
Attaching the Bits (Bits excluded)
1. Insert the bit into the hole of the driver shaft.
2. To remove the bit, pull it out from the bit holder.
Tool Operation
1. How to insert and remove bit.
To remove a bit from the chuck, hold the "B" part firmly by one hand and turn the "A" part by
counterclockwise.
To insert a bit into the chuck, hold the "B"
part firmly by one hand and turn the "A".
2. Forward / Reverse Rod selection button.
Select the forward or reverse direction of the tool by pushing the Forward / Reverse Rod.
High/Low speed selection:
– Use the "High" for drilling application.
– Use the "Low" form screwdriver application.
3. Select the applied torque.
Use the 10 sections adjustment ring to select the right torque you're your application.
4. Drill model:
Select the torque ring to the
make a drill on wood.
Installing or Removing Hook
1. Installing Hook:
Use Phillips or slotted bit size bit and
tighten in clockwise.
9.5 mm (3/8") - 11.5 mm (7/16")
Select the speed by pushing
the High / Low Speed Rod
Low speed
A
Remove the bit
Turn clockwise
sign for the maximum torque position if you would like to
2. Removing Hook:
Use Phillips or slotted bit size bit to loosen
the hook.
• 9 •
6.35 mm (1/4")
High Speed
Forward/Reverse Rod
B