Publicidad
MEM-CH - Store a
27
Memory Channel
DEL-CH - Delete a
28
memory channel
WT-LED- Standby
29
Backlight
RX-LED- Receive
30
Backlight
TX-LED- Transmit
31
Backlight
32
AL-MOD - Alarm Mode
TDR-AB - Transmit
34
selection while in Dual
Watch mode
STE - Squelch Tail
35
Elimination
000...127
*This menu is used to either create new or modify
MENU+27
existing channels (0 through 127) so that they
can be accessed from
MR/Channel Mode
000...127
*This menu is used to delete the programmed
MENU+28
information from the specified channel (0
through 127) so that it can either be programmed
again or be left empty.
MENU+29
OFF/ BLUE/ ORANGE/ PURPLE
MENU+30
OFF/ BLUE/ ORANGE/ PURPLE
MENU+31
OFF/ BLUE/ ORANGE/ PURPLE
SITE: Sounds alarm through your radio speaker only
MENU+32
TONE: Sending alarm tone
CODE: Sending alarm code
OFF
A band transmit (Upper row frequency)
B band transmit (Bottom row frequency)
MENU+34
*When enabled, priority is returned to selected
display once the signal in the other display
disappears.
ON
OFF
MENU+35
*This function is used eliminate squelch tail noise
between BAOFENG handhelds that are
communicating directly (no repeater). Reception
29
Publicidad
