Hitachi RAK-18PPB Manual De Instrucciones página 20

LEAVE HOME(LH) OPERATION
Prevent the room temperature from falling too much by setting temperature 10°C automatically when no one is at home.
This operation is able to operate by "Continuous operation" or "Day timer operation". Please use "Day timer operation" to
set the number of days up to 99 days.
Continuous operation
Day timer operation
NOTE
After reaching the set number of operation days for Leave Home or by pressing the (Leave Home) button again,
●
the unit will operate in previous mode.
During Leave Home operation, fan speed and horizontal air de ector position cannot be changed.
●
By pressing (Leave Home) button, implementation of Weekly Timer or Once Timer is cancelled.
●
In case of power supply shut down, after autorestart, all setting for number of days operation will be reset and unit
●
shall be in continuous operation.
For multi connections, when each room is running in different operation modes such as FAN only, COOLING,
●
DEHUMIDIFYING or AUTO mode, Leave Home operation cannot operate even though it is possible to set Leave
Home operation.
In order to start Leave Home operation, all rooms must stop its operation. Then, press (LEAVE HOME) button to
operate Leave Home operation.
For multi connections, when all rooms are running HEATING operation, it is possible to operate Leave Home
●
operation by pressing the (LEAVE HOME) button.
For multi connections, if two or more rooms are set to operate Leave Home operation, the capability to reach the
●
set temperature at 10°C may not possible. In addition, this also depends on outdoor temperature.
POWERFUL, SILENT and ECO operations are not applicable during Leave Home operation.
●
All manuals and user guides at all-guides.com
■ To start LEAVE HOME operation
Option 1. Continuous operation.
● Press
Room temperature is set at 10°C and heating operation starts.
" ", "
Option 2. Day timer operation.
● Press
Room temperature is set at 10°C and heating operation starts.
" ", "
Set number of operation days (1 to 99 days), if needed.
●
1
Press
Number of days blink.
* Press "
days ..... 98 days, 99 days, 1 day and so on.
* Press "
days, 97 days .... 3 days, 2 days, 1 day, 99 days and so on.
* Number of day is counted when clock indicates 0:00.
Press
●
days. Display for number of operation days will stop blinking.
Press
●
days or to have continuous operation.
To cancel LEAVE HOME operation
Press (START/STOP) button. Or
●
Press (LEAVE HOME) button again.
●
Return to previous operation mode. Or
Change to other operation mode by pressing
●
– 15 –
(LEAVE HOME) button during stop or operation.
", " ", " " is displayed on the LCD.
(LEAVE HOME) button during stop or operation.
", " ", " " is displayed on the LCD.
(TIME) button to select number of days.
(UP)" to set number of days from 1 day, 2 days, 3
(DOWN)" to set number of days from 99 days, 98
(SEND) button to con rm number of operation
(CANCEL) button to reset number of operation
(MODE) button.