Descargar Imprimir esta página

LG WT7880H A Serie Manual Del Propietário página 23

Ocultar thumbs Ver también para WT7880H A Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

Never load laundry while using Tub Clean. The
laundry may be damaged or contaminated with
cleaning products. Make sure to run the Tub Clean
cycle only when the tub is empty.
Leave the lid (door) open after finishing the laundry,
to keep the tub clean.
Tub Clean should be repeated monthly.
If mildew or musty smell already exists, run Tub
Clean once a week for three consecutive weeks.
Do not exceed the manufacturer's recommended
amount when adding bleach or powdered cleaners.
Powdered cleaner may remain in the tub after
cleaning.
In areas with hard water, mineral scale can form on
internal components of the washer. Periodically clean
the mineral buildup on the internal components to
extend the lifespan of the washer. Use of a water
softener is recommended in areas with hard water.
Use a descaler to remove
on the washer tub.
After descaling, always run the Tub Clean cycle
before washing clothing.
Mineral scale and other spots may be removed from
the stainless steel tub using a soft cloth soaked in
stainless steel cleaner.
Do not use steel wool or abrasive cleaners.
If the washer will not be used for several days,
leave the lid (door) open overnight to allow the tub
to dry.
All manuals and user guides at all-guides.com
visible mineral buildup
Detergent and fabric softener may build up in the
dispenser drawer. Remove the drawer and inserts
and check for buildup once or twice a month.
Remove the drawer by pulling it straight out until it
stops. Lift up on the front of the drawer and pull it
completely out.
Remove the inserts from the two compartments.
Clean the inserts and drawer with warm water.
Use a soft cloth or brush for cleaning and to
remove any residue.
Do not spray water inside the washer. Doing so
may cause fire or electric shock.
Wipe off any moisture with a dry towel or cloth
after cleaning.
To clean the drawer opening, use a small, non-
metal brush to clean the recess. Remove all
residue from the upper and lower parts of the
recess.
Return the inserts to the proper compartments
and replace the drawer.
Set the drawer into the opening at an angle,
then lower it and slide it into place.
If you use a descaler or tub cleaner during the Tub
Clean cycle, use the Rinse+Spin option to rinse the
washer tub before running your next wash cycle.
MAINTENANCE

Publicidad

loading