EMAK DR55H6,5 Uso Y Mantenimiento página 82

Chapter 2: General safety measures and regulations
Section 1
The safety of the operator is one of the
main worries or whoever designs and
develops a new flail mower. Our design
department, therefore, aim to offer
as many safety devices as possible.
However, every year we find that many
accidents could have been avoided
had the operator been less hurried and
more careful when handling agricultural
machineries and equipment.
This machine has been designed for This machine has been designed for
cutting a/o chopping of high grass, cutting a/o chopping of high grass,
hedges and underbush, to be used by hedges and underbush, to be used by
one operator only. Any other (improper) one operator only. Any other (improper)
use is forbidden. use is forbidden.
The operator is responsible to keep The operator is responsible to keep
a distance of at least ten meters from a distance of at least ten meters from
the machine clear of any people the machine clear of any people
when using the machine. when using the machine.
Please read and follow the safety Please read and follow the safety
instructions in this chapter of the instructions in this chapter of the
manual in detail. manual in detail.
In this instruction booklet you can find
warnings for safety or damage to the
flail mower. Please observe these
warnings carefully in order to avoid
the risk of injury or damage. There are
three kinds of warnings in this booklet:
Safety alarm: words, symbols and signs
WARNING :
This symbol is a warning against
a circumstance that could lead to
damage to the flail mower or its
components, when not observed.
Please inform yourself to what you
can or cannot do to avoid or reduce
the risk ofdamage to the vehicle or
its components.
CAUTION :
This alarm
important safety warnings for the
flail mower, or safety signals as in
the booklet or elsewhere. When
you see this symbol, please be very
careful because there is the danger
of serious injury or death. Follow
the instructions as indicated in the
safety warning!
STOP :
This symbol is used to prevent
wrong manoeuvres or performances
for the correct use and functioning
of the machine. When you see
this symbol, please be very careful
because there is the danger of
serious accidents or death, as well
as the danger of damage to some
components of the flail mower.
8
symbol identifies