Publicidad
Idiomas disponibles
Idiomas disponibles
•
Obey all applicable laws, regulations, standards and
ordinances.
11.5 OPERATE AS A MULCHER
1. Hold the machine tightly.
2. Tilt the mulcher tubes (2 - 4 in. or 5 - 10 cm).
3. Use a sweeping action to collect light unwanted
materials.
NOTE
Make sure that you install and zip the bag.
NOTE
Use the shoulder strap.
11.6 OPERATE AS A BLOWER
1. Hold the machine tightly.
2. Operate from side to side.
3. Move the machine forward slowly.
4. Keep the collected unwanted materials in front of
you.
NOTE
Use rakes and brooms to loosen the unwanted
material before you blow.
English
Use the low speed to move dry items, and high speed
to move heavy items such as large unwanted
materials or gravel.
12
MAINTENANCE
Do not let brake fluids, gasoline, petroleum-based
materials touch the plastic parts. Chemicals can cause
damage to the plastic, and make the plastic
unserviceable.
Do not use strong solvents or detergents on the plastic
housing or components.
Remove the battery pack from the machine before
maintenance.
12.1 CLEAN THE MACHINE
The machine must be dry. Humidity can cause risks of
electrical shocks.
•
Clear the unwanted material out of the air vent with
a vacuum cleaner.
•
Do not spray the air vent or put the air vent in
solvents.
•
Clean the housing and the plastic components with
a moist and soft cloth.
12.2 CLEAN THE COLLECTION BAG
•
Wear safety glasses and a dust mask.
•
If it is necessary, clean the bag 1 time a year or
more.
1. Remove the bag.
2. Turn the bag inside out.
3. Hang the bag up and clean it.
4. Hang the bag to dry.
5. Turn the bag right-side out and install it again.
12.3 CLEAN A BLOCKED TUBE /
IMPELLER
1. Wait until the machine fully stops.
2. Remove the blower tube or mulcher tubes and the
bag.
3. Remove the material that causes a blockage of the
tube or impeller.
9
NOTE
CAUTION
CAUTION
WARNING
CAUTION
EN
Publicidad
