Echo HCA-2620ES-HD Manual De Instrucciones página 10

For safe use of your product
Starting the engine
Be particularly careful to observe the following precau-
tions when starting the engine:
 Always ensure all handles and guards are fitted
 Check that none of the nuts and bolts are loose
 Check that there are no fuel leaks
 Check that the cutter blades is not damaged or exces-
sively worn. If you find any abnormalities, do not use
the product.
 Place the product in a flat, well ventilated place
 Leave plenty of space around the product and do not al-
low people or animals near it
 Remove obstructions, if any
 Make sure that the cutter blades is not touching the
ground or any obstacles
 Start the engine with the throttle trigger in the idle speed
position
 Hold the product firmly to the ground when starting the
engine
 Do not start the engine holding the product in the air
 Failure to observe the precautions could cause an accident
or injury, or even lead to a fatality.
Once the engine has started, check for abnormal vi-
brations and sounds
 Check that there are no abnormal vibrations or sounds
once the engine starts. Do not use the product if there
are abnormal vibrations or sounds. Contact your dealer
to have it repaired.
 Accidents involving parts that fall or shatter off can cause
wounds or serious injury.
Do not touch high temperature or high voltage com-
ponents while the product is running
Do not touch the following high temperature or high volt-
age components while the product is running or for some
time after it stops.
 Silencer, spark plug, gear housing, and
other high temperature components
 You could burn yourself if you touch a high
temperature component.
 Spark plug, spark plug wire, and other
high voltage components
 You could receive an electric shock if you
touch a high voltage component while the
product is running.
WARNING
Put safety first in the case of fire or smoke
 If fire comes from the engine or smoke appears from
any area other than the exhaust vent, first distance
yourself from the product to ensure your physical safe-
ty.
 Use a shovel to throw sand or other such
material on the fire to prevent it from
spreading, or put it out with a fire extin-
guisher.
 A panicked reaction could result in the fire and
other damage becoming more extensive.
Exhaust fumes are toxic
 The exhaust fumes from the engine contain toxic gases.
Do not operate the product indoors or in a plastic green-
house or in other ill ventilated places.
 The exhaust fumes could cause poisoning.
Turn off the engine when checking or maintaining
the product
Observe the following precautions when checking and
maintaining your product after use:
 Turn the engine off and do not attempt to check or main-
tain the product until the engine has cooled
 You could burn yourself.
 Remove the spark plug cap before performing checks
and maintenance
 An accident could occur if the product starts unexpectedly.
Checking the spark plug
Observe the following precautions when checking the
spark plug.
 If the electrodes or terminals are worn, or if there are
cracks in the ceramics, replace them with new parts.
 The spark test (for checking whether the spark plug is
sparking) must be carried out by your dealer.
 The spark test must not be carried out in proximity of
the spark plug hole.
 The spark test must not be performed in places where
there are fuel spills or inflammable gases
 You must not touch the
metal parts of the spark
plug
 The spark plug could ig-
nite a fire or give you an
electric shock.
8