Publicidad
Idiomas disponibles
Idiomas disponibles
Interface
DISPLAY
High-resolution full-color circular display (240x240px). The interface has been exclusively designed to allow for
comfortable and intuitive use.
USB-C
Receive MIDI signals, update the module and transfer data.
LEFT
Access the SHAPE menu (check diagram on page 24) if you are in the SEQUENCER menu, and vice versa.
RIGHT
Start or pause the module's sequencer. Holding it down will access the SETTINGS menu. To exit SET-
TINGS, press the LEFT button and you will return to the last visible menu before entering SETTINGS
(SHAPE or SEQUENCER).
LARGE
Select parameters within each menu. By pressing and holding this encoder while turning it, you can
change the current channel (there are 8 channels in total). If you hold down the button in the SHAPE
menu, you will toggle between waveform preview and the integrated oscilloscope. The oscilloscope is
always active for the MIDI, RANDOM, and RANDOM SLOPE waveforms.
SMALL
Generally, it modifies the selected parameter. A brief press of this encoder can execute a different
function depending on the menu and the parameter.
LEDS and OUTPUTS
The type and value of output are indicated in real time by the color and brightness of the LED. If the LED of an
output is green, it means that the channel is in MIDI mode. If it's yellow, it's in CLOCK mode, and if it's red or
blue, it's in any other waveform mode. The brightness of the LED indicates the current voltage level, with higher
output voltages resulting in a brighter LED.
For waveforms, when a voltage value is positive, the LED will illuminate in red. Conversely, if the value is negati-
ve, the LED will change to blue.
The output range is from -5V to 5V, with a 12-bit resolution.
Magerit
25
Publicidad
