Magerit KAIROS Manual De Instrucciones página 36

SETTINGS menu (cont.)
LONG PRESS
You can configure the duration of a long press for encoders and buttons in seconds.
OSC. RATE
The range of the oscilloscope display can be adjusted using the divisor. A higher divisor value will
result in a wider display range, making the visualization "slower".
CALIBRATE
Each of the 8 outputs has its own calibration to ensure better tuning and precision. By pressing the
SMALL encoder, you can access the CALIBRATION window, where the instructions will be displayed. The
calibration is automatically saved. Connect a voltmeter or any device capable of measuring voltage to
each output. Use the LARGE encoder to select the channel and the SMALL encoder to edit the calibra-
tion. To proceed with the calibration of the remaining voltages, press any encoder.
FACTORY RESET
Deletes all information stored in the module, including calibration. This step cannot be undone!
CREDITS
KAIROS, created by David Vijuesca and José Vijuesca in Alcorcón, Madrid.
While in any screen, such as PATCHES or CALIBRATION, pressing the LEFT button will take you back to the previous
menu. If any action was in progress, it will be cancelled. To exit SETTINGS, press the LEFT button.
Magerit
36