Hayward Pool TigerShark Manual Del Usuario página 21

Optimum waterline height
Installing the Thrust Restrictor Plate
If your units' average climbing height is incorrect, it can be corrected by installing a Thrust Restrictor Plate.
Install the restrictor plate as show in Figure 2 by placing restrictor plate in the slot and rotate clockwise to lock in place.
Restrictor insert may be needed if cleaner is still climbing too high.
Figure 3 show proper installation of restrictor plate
Figure 1
For the cleaner to operate properly...
The best water temperature for optimum operation of TigerShark lies in the range 10°C to 35°C. However, TigerShark can be
used in water at a different temperature.
Regular cleaning of the filter cartridge after use, every time the cleaner is used, epitomizes performance of the appliance. If
TigerShark is struggling to climb up the walls of the pool, wash the filter and then resume pool cleaning.
Replace the brushes (12) when they are worn to maintain effective cleaning.
If granulated chemical products are used on a daily basis in the pool, we recommend using a floating or automatic metering
feeder because such a feeder retains the calcium sediment that is sometimes contained in that type of product.
It is recommended not to use TigerShark before all of the chemical powders are not dissolved because they could clog the
filter.
In a hard-water pool, more frequent cleaning of the filter is advised. Keep the TigerShark packaging for storing it or transporting
it (in case any repairs are necessary).
Hayward only guarantees the quality, performance and safety of its products when assembled with genuine Hayward manufactured parts.
Page 6 of 14
Restrictor plate
Restrictor insert
Impeller venturi
Figure 2
Use of non genuine Hayward manufactured parts will void all warranty.
TigerShark / TigerShark QC / TigerShark 2
Incorrect waterline height
Figure 3
Rev. C