Basic Safety Precautions - Nuova Simonelli MDJ Instrucciones De Manejo

EN
• Never touch the machine with damp or wet hands.
• Never use the machine when barefoot.
• Never attempt to unplug the machine by pulling the power cord or the
machine itself.
• Do not expose the machine to atmospheric agents (sun rain, etc..).
• Never allow the machine to be used by children or by irresponsible persons.
• Always use the appliance on a flat, steady surface that is able to support
its weight.
• Always unplug the machine from the power supply before performing any
cleaning or maintenance operations.
• Do not use jets of water or detergents for cleaning.
• In the case of machine breakdown or malfunction switch the machine off
and do not tamper with it.
• For repairs contact only an authorized service center and request use of
original spare parts.
• Non-observance of the above precautions may make the machine unsafe
for future use.
• Do not leave the machine switched on when not in use. Unplug the
machine when not in use.
• Do not obstruct the ventilation and/or heat dissipation openings and/or
slits nor introduce water or any other liquids into same.
• Do not obstruct the ventilation and/or heat dissipation openings and/or
slits nor introduce water or any other liquids into same.
• Never insert spoons, forks or other utensils into the doser unit, or into the
coffee grain container (2) for any reason whatsoever while the appliance
is operating.
• Always switch off the appliance before removing blockages from the
doser unit.
• Never place the appliance in water or other liquids.
• Should a foreign body stop th e motor, switch the machine off immedi-
ately and contact an authorized service center.
• Should a foreign body stop the motor, switch the machine off immediately
and contact an authorized service center.
WARNING
Those machines bearing the "EL. MOTOR WITH THERMAL PROTECTION"
indication are equipped with device which protects the motor from over-
heating. When this device is engaged, do not attempt to operate the
machine: isolate the machine from the power supply and eliminate the
cause of the trouble before re-starting.
MDJ

BASIC SAFETY PRECAUTIONS

13