Publicidad
Magnetic
Bit Holder
LED light
Bits (5):
1 Flat Bit
1 PH1 Phillips Bit
2 PH2 Phillips Bits
1 PH3 Phillips Bit
Hexagonal
Magnetic
Extension
Screwdriver Battery Charging
•Charge the screwdriver if the charge indicator displays low
battery (red light, A).
• When using an Ion-Lithium rechargeable battery, the
screwdriver may be charge at any moment no matter the
charge level and with no capacitance loss.
• The screwdriver has low battery charge when purchased. It
shall be charged before the first use:
1. Insert the cable contact plug (B) in the screwdriver battery
charge connection (C).
2. Insert the charger plug into a properly installed power
outlet. The LED will display the red light. When the battery is
fully charged, the LED will display green, yellow and red
lights. During the charging process, the power supply socket,
the charger and rechargeable battery will be hot. Is normal
and is not indicating any malfunctioning.
3. disconnect the charger from the supply after the charging
process has been completed.; about 3 hours
4. Remove the charger cable from screwdriver battery charge
connection.
5. Give the screwdriver time to cool down in environment
temperature if getting hot during the charge process. You can
now operate the screwdriver.
ENGLISH
6
Torque
LED Indicating
Selector
Battery Charge
Switch
Bits Kit
Parts
Handle Rotation
Blocking Button
Charger
Rotation
Direction
Selector
Handle
Start Up
Battery
Charge
Connection
C
A
B
Publicidad
