Publicidad
Idiomas disponibles
Idiomas disponibles
WiFi Function
1. Use your phone to scan the code below or search "Tuya Smart" to download
and install the app.
Android
2. Register the app by pressing on the Register button at the bottom of the
screen.
3. Read the privacy policy and press the Agree button.
4. Enter your email address or phone number and press continue to register.
5. A verification code will be sent by the method selected in above step.
6. Enter the verification code in the message and type in the password you
would like to create. This need to be 6-20 characters, with letters and numbers.
7. The app is now registered. It will automatically log you in the app.
8. To add your heater to the app, first put the heater in WiFi connection mode.
The heater is in WiFi connection mode when the WiFi icon
9. The heater has two different setup modes, Quick Connection and AP (Ac-
cess Point) mode. The quick connection is a quick and simple way to set the
unit up. The AP connection uses a direct local WiFi connection between your
phone and the heater to upload the network details.
•
When first turned on using the switch on the rear of the unit, the WiFi will
be turned off. To turn the WiFi on, press and hold the UP
seconds. The WiFi icon
Instructions for use
will flash quickly to indicate the unit is in quick
English
IOS
is flashing.
button for 3
11
Publicidad
