Publicidad
Idiomas disponibles
Idiomas disponibles
1. To turn the laser on, slide the "ON/OFF" switch (3) to the
"ON" position.
2. Slide the "ON/OFF" switch (3) to the "OFF" position.
Never leave the laser on with no one nearby. Always
switch the laser off after each use.
Self-levelling:
The self-levelling automatically compensates on uneven
surfaces of ± 3° slope.
The laser level automatically adjusts the levelling whenever
vibrations or position changes have occurred during
operation. After any levelling adjustment, to avoid errors,
you must check the position of the laser beams in relation
to reference points.
If self-levelling cannot be performed because the laser's
base has an inclination greater than 4° to the horizontal,
the self-levelling LED indicator turns red.
1. Place the laser on a level, stable surface or fix it on a
stand;
2. Slide the "ON/ON" switch (3) to the "ON" position;
3. Wait until the automatic self-levelling LED indicator (2)
turns green and the projected laser lines are stable. At
this point, the self-levelling laser level is ready for
operation.
The
laser level
does
maintenance. However, for a continuous and trouble-free
operation, you must perform regular cleaning and proper
maintenance tasks.
Before carrying out any checking, maintenance or cleaning
work, remove the batteries.
Cleaning
Clean all laser components after each use. Wipe the self-
levelling laser level with a clean, damp cloth or blow it with
low pressure compressed air. Careful handling protects the
product and extends its service life.
Storage
When not in use, store the laser in a dry, clean place, free
of corrosive smoke and out of children's reach. Remove the
battery when storing.
When not in use, store the laser level in a dry, clean
place, free of corrosive smoke and out of children's
reach. Remove the battery when storing.
Never dispose of power tools and batteries with your
household waste!
According to the European Directive 2012/19/EC on
electrical and electronic equipment waste and its
transposition into national law, power tools must be
collected separately and delivered to the collection sites
intended for this purpose.
According to the Directive 2006/66/EC, defective or used
battery packs and batteries, must be collected separately
and disposed of to designated collection points.
You can get information regarding the disposal of the
machines and batteries through the person in charge for
recycling in your city.
not
require
any additional
Publicidad
