LevelOne WBR-5400 Guía De Instalación Rápida página 8

PPTP(Fig 5)
1. My IP Address and My Subnet Mask: the private IP address and subnet mask your ISP assigned to you.
2. Server IP Address: the IP address of the PPTP server.
3. PPTP Account and Password: the account and password your ISP assigned to you. If you don't want to change the
password, keep it empty.
4. Connection ID: optional. Input the connection ID if your ISP requires it.
5. Maximum Idle Time: the time of no activity to disconnect your PPTP session. Set it to zero or enable
Auto-reconnect to disable this feature. If Auto-reconnect is enabled, this product will automatically connect to ISP
after system is restarted or connection is dropped.
L2TP
1.
IP Mode: The IP Mode assigned by your ISP. You can select either Static IP Address or Dynamic IP address.
2. My IP Address and My Subnet Mask: the private IP address and subnet mask your ISP assigned to you when
your IP Mode is
3. Server IP Address: the IP address of the L2TP server.
4. L2TP Account and Password: the account and password your ISP assigned to you. If you don't want to change
the password, keep it empty.
Maximum Idle Time: the time of no activity to disconnect your L2TP session. Set it to zero or enable Auto-reconnect to
disable this feature. If Auto-reconnect is enabled, this product will automatically connect to ISP after system is
restarted or connection is dropped.
You can change Password at Basic Setting/Change Password. We strongly recommend you to
change the system password for security reason.
Please type old password in the first column. (The default password is "admin")
Type new password in the second column.
Type new password again in the third column for confirmation.
Click "save", and your new password should take effect immediately.
The basic setting of WBR-5400 is now completed. Please refer to the User`s manual for further
configurations.
Static IP Address.
4. Change Password(Fig 6)
8