Descargar Imprimir esta página

Fanimation EMBRACE FPS7981B Serie Manual Del Usuario página 4

Ocultar thumbs Ver también para EMBRACE FPS7981B Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

This manual is designed to make it as easy as possible for you
to assemble, install, operate, and maintain your ceiling fan
Tools Needed for Assembly
(Not Included)
WARNING
Before assembling your ceiling fan, refer to section on
proper method of wiring your fan (page 8). If you feel you
do not have enough wiring knowledge or experience,
have your fan installed by a licensed electrician.
For your convenience, check-off each step. As each step is completed, place a check mark. This will ensure that all
steps have been completed and will be helpful in finding your place should you be interrupted.
Do not install or use fan if any part is damaged or missing. This product is designed to use only those parts supplied with
this product and/or any accessories designated specifically for use with this product by Fanimation. Substitution of parts
or accessories not designated for use with this product by Fanimation could result in personal injury or property damage.
Contact your retail store for missing or damaged parts.
1. Check to see that you have received the following parts:
NOTE: If you are uncertain of part description, refer to exploded view illustration.
Ceiling Bracket Assembly (1)
Housing (1)
Blade Holder Set (1)
Hardware bags
Screws with lock
Serrated Head
washer (7)
Screws (10)
Unpacking Instructions
WARNING
Motor Assembly (1)
(FPS7955B/FPS7981B)
Light Kit Assembly (1)
(FPS7981B)
Steel Cap Assembly (1)
(FPS7955B)
Flat Washer (10)
Wire
Connectors (4)
Materials
Wiring outlet box and box connectors must be of type
required by local code. The minimum wire would be a 3-
conductor (2-wire with ground) of the following size:
Installed Wire Length
Up to 50 ft.
50 - 100 ft.
NOTE: Place the parts from the loose parts bags in a small
container to keep them from being lost. If any parts are missing,
contact your local retailer.
Receiver (1)
Wire Connectors (6)
Glass Assembly (1)
Bag Assembly Safety Cable
Safety Cable (1)
Cable Clamp (1)
4
Wire Size A.W.G.
14
12
12V 23A
Hand-held Remote (1)
Wall Holder (1)
Screws (2)
Battery (1)
Flat Washer,
Lag Bolt Screw (1)
Stainless Steel
(1)

Publicidad

loading

Este manual también es adecuado para:

Embrace fps7955b serieEmbrace fps7955bbl